Do you know the 5 differences between a servo motor and a stepper motor

First, the control accuracy is different:The step angles of the two-phase hybrid stepping motor are 3.6° and 1.8°, respectively, and the step……

日期 2020-09-21

How to set the servo motor parameters?

Initialize parameters before connecting.On the control card: select the control mode; make the PID parameter zero; turn off the default enable signal w……

日期 2020-09-21

2020 look at those data to select the servo motor

Before the selection calculation, the first thing to determine is the position and speed requirements of the end of the mechanism, and then determine t……

日期 2020-09-18
    « Previous page1Next page »